Vendor: BarProducts Handcrafted
Type: Liquor Bottle Shelf
Price: 129.00

LED Liquor Bottle Display Shelves are a great way to showcase your different types of liquor brands. It grabs the attention of your guests while creating a fun ambiance decor for your bar. These 2-step (tier) Inside Corner shelves are designed to sit in between your straight LED Liquor Bottle Display Shelves. Place one Inside Corner shelf in between two of our BarConic® LED Liquor Bottle Display Shelf 2 Tier Black Shelves and you'll have a beautiful corner piece to display your liquor bottles!

The LED Liquor Bottle Display Shelves are manufactured right here in our USA Woodshop. Each shelf showcases high-quality craftsmanship that is durable and built to last at an unbeatable price.

The lightly frosted acrylic top allows the perfect amount of LED light to shine through and brightly illuminate your liquor bottles. Each unit comes with an RGB LED remote control that features many different light show settings. Choose from static, to fade, to jump... adjust the speed and define your very own light shows. The LED lights are full color 3 channel RGB mode that is dedicated to long illumination using the most advanced PWM (Pulse Width Modulation) digital control technology.

Each unit also comes with protective feet that you may wish to install on the bottom to lift the base of the shelf off of the surface. These are optional. Instructions for use and warranty are also included with each LED shelf purchase.

** Why such a low cost and fast shipping? Because these Liquor Bottle Display Shelves are pre-built right here in our very own woodshop. We manufacture them and have them ready to ship to you with FREE SHIPPING on top of the already low prices. You will not find this quality of an LED Bottle Shelf at this price anywhere else!

Click here for the PDF Manual

https://devsocialapp.com/file/d/1hzpqFSAQx0Uirc9SyN1r6qoM4AhXzzgM/view?usp=sharing

Vendor: devsocialapp
Type: Drink Dispenser
Price: 1025.00

MixStation Drink Mixer creates smooth shakes and delicious frozen treats. It uses a heavy-duty motor for fast and efficient mixing of hard- and soft-serve ice cream and tough mix-ins. As part of our commercial drink mixer line, the HMD1000 mixer is powerful and durable for consistent results in professional and foodservice applications.

Vendor: devsocialapp
Type: Drink Dispenser
Price: 495.00

Bartesian is a premium, capsule based system that crafts bar quality cocktails at the touch of a button. Insert capsule, select spirit strength, and serve cocktail in under 30 seconds. Professional Cocktail Machine instantly turns any commercial space into a bar. Your staff can easily craft and serve profitable, premium cocktails — no training needed. Includes bottle lock with key and 5 bottles for spirits. Works with any brand of vodka, whiskey, tequila, gin, or rum.

Vendor: devsocialapp
Type: Champagne Saber
Price: 124.95

This exquisite Champagne Saber is crafted from stainless steel and finished in a striking gold plating. Perfect for special occasions, this gorgeous saber ensures an unforgettable performance with its dramatic sabering of champagne bottles. Comes with a black stainless steel stand for a truly elegant look. This product is recommended to be washed by hand.  Measures 17 ¾ inches in length. 

How to saber a Champagne Bottle

• Chill neck of Champagne bottle in ice for 10 minutes. Keep cork cage on bottle when icing.
• Remove all foil and wire cage from bottle.
• Locate the seam that leads up to the lip of the bottle.
• Hold bottle with your non-dominant hand at a 30-degree angle, place thumb in the punt of the bottle. Top of bottle should be angled away from body
• Rest the blade flat against the glass on the seam.
• In one swift motion, run the blade along the seam of the bottle, strike the lip and follow through.
• The cork and the lip will separate from the neck of the bottle.
• Celebrate!

• Measurement: 17 ¾" Long
• Material: Stainless Steel
• Gold Plated
• HAND WASH ONLY

Vendor: BarProducts Handcrafted
Type: Drinkware
Price: 1.29 - 14.99 (2 variants)

Enjoy a fun night with friends with our unique Cactus Shot Serving Tray! Perfect for tequila shots, it includes a dishwasher-safe salt rimmer for your shot glasses - although our BarConic® Cactus Shot Glasses look great with it, standard shot glasses will work as well. Make an impression with this fun Cactus Pattern Design at your next gathering! 

Features:

• Dimensions: 16.25"L x 8.5"W
• Glassware Optional
• Fits 6 shot glasses
• Comes with a dishwasher-safe starboard salt rimmer 
• Made from birchwood
• Our BarConic® Cactus Shot Glasses glasses fit perfectly

Vendor: BarProducts Handcrafted
Type: Drinkware
Price: 1.29 - 14.99 (2 variants)

Enjoy a fun night with friends with our unique Cactus Shot Serving Tray! Perfect for tequila shots, it includes a dishwasher-safe salt rimmer for your shot glasses - although our BarConic® Cactus Shot Glasses look great with it, standard shot glasses will work as well. Make an impression with this fun Cactus Textured Design at your next gathering! 

Features:

• Dimensions: 16.25"L x 8.5"W
• Glassware Optional
• Fits 6 shot glasses
• Comes with a dishwasher-safe starboard salt rimmer 
• Made from birchwood 
• Our BarConic® Cactus Shot Glasses glasses fit perfectly

Vendor: devsocialapp
Type: Bar Equipment
Price: 32.95 - 46.95 (4 variants)

Our Flush Elbow Fitting is designed for maximum durability and style. Its 90-degree angles provide a tight seal and can easily be installed with a unique metal finish that adds an extra touch of elegance. Make your installations look sleek and modern! These fittings come in 4 different finishes of stainless steel and brass. 

SPECIFICATIONS

• 2" Inner Diameter
• Wall thickness: .050"

FEATURES

• Allows the rail to turn corners at a 90° angle
• Made of 304 grade stainless steel
• 4 finishes available
• Matching components available

Vendor: devsocialapp
Type: Security
Price: 1.05

Vendor: devsocialapp
Type: Beer Accessory
Price: 17.99

Experience an elevated level of sophistication at your home bar with this alluring Walnut and Oak Flat Top Beer Tap. Revel in the stylish wooden design, or add the optional chalk finish for a one-of-a-kind flourish. Elevate your beer-pouring ritual with this luxurious beer tap!

These Oak and Walnut Flat Top Beer Tap handles measure 9”, 8", 7", 6", 5", and 4" in height and 1.5” in width. The smooth wood surface offers a sleek and modern look to any bar, brewery, home brewer, and more! It is sold with the appropriate mounting hardware so that it is an easy add-on to your bar (Chrome Ferrule).

Vendor: devsocialapp
Type: Beer Accessory
Price: 17.99

Experience an elevated level of sophistication at your home bar with this alluring Walnut and Oak Slanted Beer Tap. Revel in the stylish wooden design or add the optional chalk finish for a one-of-a-kind flourish. Elevate your beer-pouring ritual with this luxurious beer tap!

These chalkboard beer tap handles measure approximately 9”, 8", 7", 6", 5", and 4" in height and 1.5” in width. The smooth black surface caters to any type of chalk and then wipes away clean when you are ready to change it up. It is sold with the appropriate mounting hardware (Chrome Ferrule).

Vendor: devsocialapp
Type: Bar Accessory
Price: 23.95 - 119.95 (4 variants)

Transform your bar area with just a few added features. These foot rails provide comfort for your guests when sitting at the bar and are the perfect solution to spruce up your bar area. They will add a classy element to any indoor bar or outdoor patio bar area. 

Foot railing made of brushed 304 stainless steel is available in 2 in. diameter tube sizes from 2 ft. through 8 ft. lengths to fit the size of your bar. This polished stainless steel foot rail has a mirrored look and wall thickness of .050”. To properly install this tubing along your bar, add rail brackets in the same diameter. Carefully measure where each bracket will be placed before drilling into the bar, wall, or floor. For accurate support, bar brackets should be placed at each end of the tubing, plus one for every 4 ft. increment. To allow the foot railing to match any angles of your bar, use elbows and fittings. With using end caps and flanges, your foot railing will have a stunning finished look and will be mounted correctly. 

NOTE: If your bar is not an even full foot increment, but rather has some inch increment you will need to order up to the next foot. So, examples are if the bar measures 3’6″ you will need to order a 4 ft. piece of tubing, if the bar is 7’4″ you will need to order an 8 ft. piece of tubing. If this is the case, you then need to cut the rail with a miter saw prior to installation. To connect the two sections of tubing together, an internal splicing sleeve should be used. Then the seam between the two joined pieces can be covered by placing a bracket over the joint.

SPECIFICATIONS

• 2" Outside Diameter
• Wall thickness: .050"

FEATURES

• Steel tubing for foot rails 
• Made of brushed 304 grade stainless steel
• Matching components available
• A bracket should be used at both ends and at every 4’ increments

Vendor: devsocialapp
Type: Bar Accessory
Price: 23.95 - 102.95 (4 variants)

Transform your bar area with just a few added features. These foot rails provide comfort for your guests when sitting at the bar and are the perfect solution to spruce up your bar area. They will add a classy element to any indoor bar or outdoor patio bar area. 

Foot railing made of polished 304 stainless steel is available in 2 in. diameter tube sizes from 2 ft. through 8 ft. lengths to fit the size of your bar. This polished stainless steel foot rail has a mirrored look and wall thickness of .050”. To properly install this tubing along your bar, add rail brackets in the same diameter. Carefully measure where each bracket will be placed before drilling into the bar, wall, or floor. For accurate support, bar brackets should be placed at each end of the tubing, plus one for every 4 ft. increment. To allow the foot railing to match any angles of your bar, use elbows and fittings. With using end caps and flanges, your foot railing will have a stunning finished look and will be mounted correctly. 

NOTE: If your bar is not an even full foot increment, but rather has some inch increment you will need to order up to the next foot. So, examples are if the bar measures 3’6″ you will need to order a 4 ft. piece of tubing, if the bar is 7’4″ you will need to order an 8 ft. piece of tubing. If this is the case, you then need to cut the rail with a miter saw prior to installation. To connect the two sections of tubing together, an internal splicing sleeve should be used. Then the seam between the two joined pieces can be covered by placing a bracket over the joint.

SPECIFICATIONS

• 2" Outside Diameter
• Wall thickness: .050"

FEATURES

• Steel tubing for foot rails 
• Made of 304 grade stainless steel
• Polished finish for a mirrored look
• Matching components available
• A bracket should be used at both ends and at every 4’ increments

Vendor: devsocialapp
Type: Bar Accessory
Price: 64.95 - 274.95 (4 variants)

Transform your bar area with just a few added features. These foot rails provide comfort for your guests when sitting at the bar and are the perfect solution to spruce up your bar area. They will add a classy element to any indoor bar or outdoor patio bar area. 

Foot railing made of satin brushed brass are available in 2 in. diameter tube sizes from 2 ft. through 8 ft. lengths to fit the size of your bar. This polished stainless steel foot rail has a mirrored look and wall thickness of .050”. To properly install this tubing along your bar, add rail brackets in the same diameter. Carefully measure where each bracket will be placed before drilling into the bar, wall, or floor. For accurate support, bar brackets should be placed at each end of the tubing, plus one for every 4 ft. increment. To allow the foot railing to match any angles of your bar, use elbows and fittings. With using end caps and flanges, your foot railing will have a stunning finished look and will be mounted correctly. 

NOTE: If your bar is not an even full foot increment, but rather has some inch increment you will need to order up to the next foot. So, examples are if the bar measures 3’6″ you will need to order a 4 ft. piece of tubing, if the bar is 7’4″ you will need to order an 8 ft. piece of tubing. If this is the case, you then need to cut the rail with a miter saw prior to installation. To connect the two sections of tubing together, an internal splicing sleeve should be used. Then the seam between the two joined pieces can be covered by placing a bracket over the joint.

SPECIFICATIONS

• 2" Outside Diameter
• Wall thickness: .050"

FEATURES

• Steel tubing for foot rails 
• Made of satin brushed brass
• Matching components available
• A bracket should be used at both ends and at every 4’ increments

Vendor: devsocialapp
Type: Bar Accessory
Price: 49.95 - 214.95 (4 variants)

Transform your bar area with just a few added features. These foot rails provide comfort for your guests when sitting at the bar and are the perfect solution to spruce up your bar area. They will add a classy element to any indoor bar or outdoor patio bar area. 

Foot railing made of polished brass are available in 2 in. diameter tube sizes from 2 ft. through 8 ft. lengths to fit the size of your bar. This polished brass foot rail has a wall thickness of .050”. To properly install this tubing along your bar, add rail brackets in the same diameter. Carefully measure where each bracket will be placed before drilling into the bar, wall, or floor. For accurate support, bar brackets should be placed at each end of the tubing, plus one for every 4 ft. increment. To allow the foot railing to match any angles of your bar, use elbows and fittings. With using end caps and flanges, your foot railing will have a stunning finished look and will be mounted correctly. 

NOTE: If your bar is not an even full foot increment, but rather has some inch increment you will need to order up to the next foot. So, examples are if the bar measures 3’6″ you will need to order a 4 ft. piece of tubing, if the bar is 7’4″ you will need to order an 8 ft. piece of tubing. If this is the case, you then need to cut the rail with a miter saw prior to installation. To connect the two sections of tubing together, an internal splicing sleeve should be used. Then the seam between the two joined pieces can be covered by placing a bracket over the joint.

SPECIFICATIONS

• 2" Outside Diameter
• Wall thickness: .050"

FEATURES

• Steel tubing for foot rails 
• Made of polished brass
• Matching components available
• A bracket should be used at both ends and at every 4’ increments

Vendor: devsocialapp
Type: Bar Accessory
Price: 15.95

• Stainless Steel
• Measures 6  inches in length 
• Made for 2" diameter tubes 
• Hidden once tubes are connected together 

Vendor: devsocialapp
Type: Bar Accessory
Price: 32.95 - 34.95 (4 variants)

This flush angle fitting is a simple alternative to miters and custom bends that will perform the trick of helping your bar foot rail turn a 135º corner with ease. Simply slide a piece of  foot rail tubing tubing into either end and easily manage an oblique angle as you complete your installation. Comes in 4 different finishes of stainless steel and brass.  

SPECIFICATIONS

• 2" Inner Diameter
• Wall thickness: .050"
• 135 Degree

FEATURES

• Easily accommodates any oblique angles as you're installing bar foot rail
• Both ends can be used
• Allows the rail to turn corners at a 90° angle
• Made of 304 grade stainless steel and brass
• 4 finishes available
• Matching components available

Vendor: devsocialapp
Type: Bar Accessory
Price: 32.95 - 46.95 (4 variants)

This curved flush elbow fitting can turn your bar rail 90 degrees with ease to match the shape of your bar. Just slide a rail on either end, secure the tubing with matching any matching brackets and enjoy the comfortable addition that seems custom-fit to match any L-shaped turns in your bar. These curved fittings come in 4 different finishes of stainless steel and brass. 

SPECIFICATIONS

• 2" Inner Diameter
• Wall thickness: .050"

FEATURES

• Allows the rail to turn corners at a 90° angle
• Made of 304 grade stainless steel
• 4 finishes available
• Matching components available

Vendor: devsocialapp
Type: Bar Accessory
Price: 15.95 - 16.95 (4 variants)

These wall mount flanges, can hold your bar rail tubing securely on any flat surface in your home or commercial bar. They come in 4 different finish types and comes with the  mounting hardware to ensure that installation on any surface is a breeze. 

SPECIFICATIONS

• 2" Inner Diameter
• Wall thickness: .050"

FEATURES

• Allow you to install new bar foot rail tubing or bar arm rests in any setting.
• Made of 304 grade stainless steel
• 4 finishes available
• Matching components available
• Comes with mounting screws

Vendor: devsocialapp
Type: Bar Accessory
Price: 27.95 - 30.45 (4 variants)

This bar rail pipe end cap completes the rail's modern look and protect your guests from hurting someone with unprotected tubing. The ball cap adds a modern style at the end of your bar rail. They're very easy to install, as the end caps slide directly into the tubing that creates a cohesive, sleek look throughout your bar. Ball caps come in 4 different finishes of metal from stainless steel to brass. Fits a standard 2" pipe tube. 

SPECIFICATIONS

• 2" Outside Diameter
• Wall thickness: .050"

FEATURES

• End cap for rail bar
• Cap allows for dome shaped end to rail
• Made of 304 grade stainless steel
• 4 finishes available
• Matching components available
• Caps can be used at both ends of rail 

Vendor: devsocialapp
Type: Bar Accessory
Price: 9.95 - 12.95 (4 variants)

This bar rail pipe end cap completes the rail's modern look and protect your guests from hurting someone with unprotected tubing. The Victorian design adds an extra artistic look to the end of your bar rail. They're very easy to install, as the end caps slide directly into the tubing that creates a cohesive, sleek look throughout your bar. Victorian caps come in 4 different finishes of metal from stainless steel to brass. Fits a standard 2" pipe tube. Comes with 6 caps. 


SPECIFICATIONS

• 2" Outside Diameter
• Wall thickness: .050"

FEATURES

• End cap for rail bar
• Cap allows for fancy vintage look to the end of the rails 
• Made of 304 grade stainless steel
• 4 finishes available
• Matching components available
• Caps can be used at both ends of rail

Vendor: devsocialapp
Type: Bar Accessory
Price: 18.95 - 29.95 (4 variants)

SPECIFICATIONS

• 2" Outside Diameter
• Wall thickness: .050"

FEATURES

• End cap for rail bar
• Cap allows for flat end to rail
• Made of 304 grade stainless steel and brass
• 4 finishes available
• Matching components available
• Caps can be used at both ends of rail

Vendor: devsocialapp
Type: Bar Accessory
Price: 7.45 - 18.95 (4 variants)

These bar rail flat end caps complete the rail's modern look and protect your guests from hurting someone with unprotected tubing. They're very easy to install, as the end caps slide directly into the tubing. Flat caps come in 4 different finishes of metal from stainless steel to brass. Fits a standard 2" pipe tube. 

SPECIFICATIONS

• 2" Outside Diameter
• Wall thickness: .050"

FEATURES

• End cap for rail bar
• Cap allows for flat end to rail
• Made of 304 grade stainless steel and brass
• 4 finishes available
• Matching components available
• Caps can be used at both ends of rail

Vendor: devsocialapp
Type: Bar Equipment
Price: 7.45 - 18.95 (4 variants)

This bar rail pipe end cap completes the rail's modern look and protect your guests from hurting someone with unprotected tubing. They're very easy to install, as the brass end caps slide directly into the tubing. Dome caps come in 4 different finishes of metal from stainless steel to brass. Fits a standard 2" pipe tube.

SPECIFICATIONS

• 2" Outside Diameter
• Wall thickness: .050"

FEATURES

• End cap for rail bar
• Cap allows for dome shaped end to rail
• Made of 304 grade stainless steel and brass
• 4 finishes available
• Matching components available
• Caps can be used at both ends of rail

Vendor: devsocialapp
Type: Bar Accessory
Price: 42.95 - 69.95 (4 variants)

Contemporary bar rail brackets allow your bar setting to have a a stylish, modern appearance with the versatility of a bracket that can either be mounted to the face of your bar or to the floor in front of your bar. this contemporary bracket, along with its matching components, is a luxurious, convenient addition to any home or commercial bar. Comes in 4 different finishes of stainless steel and brass. Each bracket measures 7" long. 

SPECIFICATIONS

• 2" Outside Diameter
• Wall thickness: .050"

FEATURES

• Bracket for rail bar
• Made of 304 grade stainless steel
• 4 finishes available 
• Matching components available
• A bracket should be used at both ends and at every 4’ increments

Vendor: devsocialapp
Type: Bar Accessory
Price: 37.95 - 52.95 (4 variants)

If you're looking for the most secure way to attach your foot rails, then you've come to the right place. These 90-degree brackets attach securely to both the face of your bar and the floor for extra stability. These bar foot rail brackets are built for simplicity in measuring and placing them during installation. This bracket comes in 4 different finishes of stainless steel and brass. Each bracket measures 7" x 7".  Comes with instillation kit. 

SPECIFICATIONS

• 2" Outside Diameter
• Wall thickness: .050"

FEATURES

• Bracket for rail bar
• Made of 304 grade stainless steel and brass 
• 4 finishes available 
• Matching components available
• A bracket should be used at both ends and at every 4’ increments